What Is The FTP Of A Pro Cyclist?

How many watts can a pro cyclist sustain?

429.8 wattsAssuming a weight of 70 kg (a bit more than 154 lbs.), the average rider will be able to maintain a power output of 163.8 watts for the 20 minute effort while the pro will maintain 429.8 watts..

What is a good peloton score?

She also has more endurance than me. But her power levels are much, much lower than mine on the Peloton bike….What is a good average output after ride a ride?Males (W/kg)Females (W/kg)ExcellentFrom 3.93 to 5.04GoodFrom 2.79 to 3.92FairFrom 2.23 to 2.78UntrainedLess than 2.221 more row

What is the average watts for a cyclist?

Most pro cyclists produce about 200 to 300 watts on average during a four-hour tour stage. The recreational rider, on the other hand, might be only able to sustain this wattage during a 45-minute or hour-long spin class.

What is a good power to weight ratio for a cyclist?

This means you can generate 4.05 watts for every kilogram of body weight. A power to weight ratio of 4 to 4.5 is equivalent to a competitive Category 2 racer. A power to weight ratio of 5-6 would put you in the range of a Category 1 elite professional (according to Andy Coggan’s power profiling chart).

What is a reasonable FTP?

47% of people have an FTP below 3.2W/kg. 45% of people have an FTP of 3.4W/kg or more. 8% of people have an FTP between 3.2W/kg and 3.4W/kg.

How many watts is 20 mph?

Cycling PowerSpeed – kmh (mph)Power (watts)Increase in power needed to increase speed by 2.5kmh22.5 (14)952025 (15.6)1202527.5 (17.2)1482830 (18.7)180325 more rows

What is a good FTP for a triathlete?

An FTP of 340 to 360 watts is typical for the top male riders. It is important to note that FTP in relation to the athlete’s weight is the best way to compare any two riders.

What is a good watts per kg cycling?

Here are the categories that they recommend you race based on your FTP data and watts per kilogram. The Zwift C category (next from the bottom) says that you should be able to ride at the level between 2.5 to 3.1 w/kg. If you want to succeed in the A category, you’ll need to be able to hit 4.0 w/kg or better.

What is a good FTP for a beginner cyclist?

Overton says the average newer rider with some fitness will hover in the 2.0 range, while top cyclists in the world hover around 7.0. That number won’t affect your training at all, but it’s a good way to see how you compare to other riders.

What’s a good watts per kg?

Table: Power-to-weight ratio/watts per kilogram for a range of rider weights and power outputs120w300w75kg1.64.080kg1.53.885kg1.43.590kg1.33.37 more rows•Feb 3, 2020

What is a good FTP for a cyclist?

How do you go about improving FTP?ZonePercentage of FTPUse for256-75%Long, endurance rides376-90%Tempo rides aimed at improving endurance at high effort491-105%8-30 mintue intervals focused on improving FTP5106-120%3-8 minute ‘V02 max’ intervals3 more rows•Mar 23, 2020

What is the highest FTP ever recorded?

According to his Strava intensity, his FTP is ~490W. Someone who would do well in the hour record, which, by definition, is an FTP test, doesn’t take into account weight very much (but penalizes height), and tends to reward outright power over tiny aerodynamic-ness.

What was Lance Armstrong’s FTP?

The disgraced cyclist who had his seven Tour de France titles stripped rode 115 miles in 5 hours and 52 minutes, averaging 31.5 kph (19.6mph) and climbing 1579m (5182ft) over the rolling roads west of Austin. Armstrong wrote on Twitter, “6 hours/115 miles in miserable weather with @lawsoncraddock.

What is a decent FTP score?

Average recreational cyclists would be about 2.5-3.0 Watts/Kg for FTP. People who race regularly may be 3.0-3.75. You get above 3.75-4.25 and those are local elite racers. Anything over 4.25 is domestic pro and it goes up from there.

How accurate is strava Watts?

Given measured power data, Strava said that my average power for the whole ride was 164 watts and produced a total of 1,233 kilojoules of energy. Without direct measurements, Strava estimated that my average power was 177 watts and total energy production was 1,328 kilojoules. That’s an overall power error of 7.9%.